RL- C210 is replacement iron tip mainly focus in iron handle replacement and repairs the head of the soldering iron. Hence, there is no deviation from the original temperature, and the welding performance is equivalent where its Replacement Tip Series are RL C210-IS,RL C210-I and RL C210-K.It has some importants which gets heated with in a second and has melting tin in 2 seconds. In addition, ,it has some important feature which includes good oxidation resistance ,multilayer plating under the smooth tin and is also universal.
This soldering iron Tip is considered as universal iron tip and it cuts off the worn original soldering iron tip. You don’t need to solder, just plug and play and its installation is also easy. Cubersome has been eliminated by it and the efficiency is improved. For its usage, firstly, turn off worn original tip and gently break apart a little to replace the head and tail. Then, tighten the replacement tip directly on the soldering iron tip and now you are ready to use.
There are various multilayer electroplating process which involves nano electroplating, iron plating nickel plating, chrome plating (to prevent corrosion, prevent tin creep),tin plating protective layer (it is easier to apply tin when soldering and prevents effectively for oxidation. Oxidation resistance, corrosion resistance, oxygen-free copper (high thermal conductivity) due to that it enhances the long service life. Specifications of this device is various and meets different solder joints that enhances for a variety of work needs, you can choose.
Talking about its measurement, it weight is 7.5 g and the quantity is 5 pcs/ set. The length of this iron rip differs, it is about 18.5 or 19, the breadth and height is same and it is 3.8 mm. After turning on the machine, the temperature rises rapidly in 2 seconds, and the tin can be melted in 2 seconds, thus it’s always ready and easy to use.
Pointed head flying lead point is bright and free of impurities and easier to tin during welding, hence enhances long service life. The tip is tin-plated, which is easy to be tinned and not easy to be oxidized when soldering. Knife head drag tin and glue can be found, which is durable knife with edge and 45° oblique design. Knife edge is more convenient.
